A wakeboard slider is a device in which the wake boarder will jump on, while being towed behind a boat, and then land back into the water. Basically a slider is like a piece to an obstacle course. You can buy sliders, but then of course you also have the option of learning how to build a wakeboard slider yourself, which is ideal because then you can customize it and make it as easy or difficult to jump as you want.
Getting Started
When it comes to learning how to build a wakeboard slider, the first thing you need to do is get the necessary materials together. These materials include: plastic drums, plywood, screws, PVC cleaner, cement, PVC, PVC internal unions, and toggle bolts.
Once you have all of the materials for your wakeboard slider gathered together you need to first build yourself a basic frame holding the drums, one which has a length and breadth of at least twelve and six feet respectively. Now you need to box the drums from all four corners, so that the barrel will not be able to fit through all the way, and then add supports for the four feet long beam. After this you need to attach angle braces to it so that dangerous right-left movements will be prevented, and also to support the plywood.
Now you just need to mount it to the PVC, join the two lengths, and attach the PVC, using standard toggle bolts. Remember that it is going to be most ideal if you use the bolts at a distance of about four feet, so that the nuts are facing the direction in which the tubing is running lengthwise. Once you have completed this you want to add the rear slider, and then evenly put the front section of the slider to the rear, making sure that there are no gaps visible.
Now you want to add the arc to the front end of the wakeboard slider so that the tubing goes underwater, and now you must apply the braces throughout the arc for support. Then you are finished making your wakeboard slider and you can get out on the water and test it out for yourself. Remember that when learning how to build a wakeboard slider if you find it too low or too high you can always resume working on it and adjust the levels to your own specific preferences.
Not only does this make it more convenient for you but also by learning how to build your own wakeboard slider you will save yourself a great deal of money and have bragging rights.
Rich Wells runs his own online travel business. Check out these great Wakeboarding articles, ideas and info or perhaps Wakeboard reviews and resources.
http://www.sportallsport.com
Article Source: http://EzineArticles.com/?expert=Richie_Wells
No comments:
Post a Comment